Drops to Cubic Inches (gtt → in³)
Formula
1 gtt = 0.0030511872047366143 in³Conversion Table
| gtt | in³ |
|---|---|
| 0 | 0 |
| 1.0000 | 0.0030512 |
| 2.0000 | 0.0061024 |
| 3.0000 | 0.0091536 |
| 4.0000 | 0.012205 |
| 5.0000 | 0.015256 |
| 6.0000 | 0.018307 |
| 7.0000 | 0.021358 |
| 8.0000 | 0.024409 |
| 9.0000 | 0.027461 |
| 10.000 | 0.030512 |
| 11.000 | 0.033563 |
| 12.000 | 0.036614 |
| 13.000 | 0.039665 |
| 14.000 | 0.042717 |
| 15.000 | 0.045768 |
| 16.000 | 0.048819 |
| 17.000 | 0.051870 |
| 18.000 | 0.054921 |
| 19.000 | 0.057973 |
| gtt | in³ |
|---|---|
| 20.000 | 0.061024 |
| 21.000 | 0.064075 |
| 22.000 | 0.067126 |
| 23.000 | 0.070177 |
| 24.000 | 0.073228 |
| 25.000 | 0.076280 |
| 26.000 | 0.079331 |
| 27.000 | 0.082382 |
| 28.000 | 0.085433 |
| 29.000 | 0.088484 |
| 30.000 | 0.091536 |
| 31.000 | 0.094587 |
| 32.000 | 0.097638 |
| 33.000 | 0.10069 |
| 34.000 | 0.10374 |
| 35.000 | 0.10679 |
| 36.000 | 0.10984 |
| 37.000 | 0.11289 |
| 38.000 | 0.11595 |
| 39.000 | 0.11900 |
| gtt | in³ |
|---|---|
| 40.000 | 0.12205 |
| 41.000 | 0.12510 |
| 42.000 | 0.12815 |
| 43.000 | 0.13120 |
| 44.000 | 0.13425 |
| 45.000 | 0.13730 |
| 46.000 | 0.14035 |
| 47.000 | 0.14341 |
| 48.000 | 0.14646 |
| 49.000 | 0.14951 |
| 50.000 | 0.15256 |
| 51.000 | 0.15561 |
| 52.000 | 0.15866 |
| 53.000 | 0.16171 |
| 54.000 | 0.16476 |
| 55.000 | 0.16782 |
| 56.000 | 0.17087 |
| 57.000 | 0.17392 |
| 58.000 | 0.17697 |
| 59.000 | 0.18002 |
| gtt | in³ |
|---|---|
| 60.000 | 0.18307 |
| 61.000 | 0.18612 |
| 62.000 | 0.18917 |
| 63.000 | 0.19222 |
| 64.000 | 0.19528 |
| 65.000 | 0.19833 |
| 66.000 | 0.20138 |
| 67.000 | 0.20443 |
| 68.000 | 0.20748 |
| 69.000 | 0.21053 |
| 70.000 | 0.21358 |
| 71.000 | 0.21663 |
| 72.000 | 0.21969 |
| 73.000 | 0.22274 |
| 74.000 | 0.22579 |
| 75.000 | 0.22884 |
| 76.000 | 0.23189 |
| 77.000 | 0.23494 |
| 78.000 | 0.23799 |
| 79.000 | 0.24104 |
Drops to Cubic Inches Conversion
Converting Drops (gtt) to Cubic Inches (in³) is a common volume conversion. 1 gtt equals 0.003051 in³. For example, 100 gtt is equal to 0.305119 in³.
Quick Mental Math: Drops to Cubic Inches
Volume conversions to cubic units require consistent factors from established relationships.
Why is converting Drops to Cubic Inches tricky?
Cubic units scale differently than linear counterparts, making mental conversion unintuitive.
Quick Reference Values
1 gtt = 0.003051 in³. 5 gtt = 0.015256 in³. 10 gtt = 0.030512 in³. 25 gtt = 0.07628 in³. 50 gtt = 0.152559 in³. 100 gtt = 0.305119 in³.
What is Drops?
Drops (gtt) is a unit of volume. A drop is a non-standard unit of volume commonly used to measure small liquid quantities. It is approximately equal to 0.05 milliliters, though the exact volume varies with liquid density and dropper design. Drops are widely used in medicine and chemistry for dosing and titration [nist-sp-811]. The drop as a volume measure dates back to early apothecary practices for precise liquid dosing. Its informal use predates modern standardized units but remains relevant in practical applications requiring small quantities [nist-sp-811]. Drops are used globally in medical dosing, eye drops, and laboratory procedures. Though not standardized by SI, they remain practical for everyday measurements where precision instruments are unavailable [nist-sp-811].
What is Cubic Inches?
Cubic Inches (in³) is a unit of volume. A cubic inch is a volume unit defined as the volume of a cube with edges one inch long. One cubic inch equals exactly 16.387064 cubic centimeters (cm³), or 0.000016387064 cubic meters (m³), based on the inch defined by international agreement. This unit is commonly used in the United States for measuring engine displacement and small volumes in manufacturing and engineering applications [nist-si-guide]. The inch originated from the British Imperial measurement system, with its volume form, the cubic inch, defined as the cube of the inch. The inch was standardized internationally in the mid-20th century to exactly 2.54 centimeters, which fixed the cubic inch conversion factor [nist-si-guide]. Cubic inches are primarily used in the United States and Canada for automotive engine sizes and small volume measurements. Industries such as aerospace, manufacturing, and appliance design often use this unit for precise volume specification [nist-si-guide].
Common Misspellings
People often search for this conversion using these alternate spellings: dropes, draps, dropz, dropps, cubic inchs, cubic inchers, cubic inhes, cubic inchs, cubicinches. All of these refer to the Drops to Cubic Inches conversion.